Specifying Document Settings; [Original Size]; [Long Original]; [Simplex/Duplex] - Konica Minolta bizhub C35 User Manual

Specifying document settings

From the [Original Settings] screen, settings can be specified for the docu-
ment to be faxed.

[Original Size]

Specify the size of the document that is to be faxed.
Item
[Standard Size]
[Custom Size]

[Long Original]

Select whether or not a long original document is to be sent. A document with
a maximum length of 1,000 mm can be sent.
To send a long document, press [ON].
Long documents can only be scanned using the ADF. Double-sided
long documents cannot be scanned.

[Simplex/Duplex]

Select whether double-sided documents are to be scanned when the ADF is
used.
Item
[1-sided]
[2-sided]
3-18
Description
When sending a document of a standard size,
press [Standard Size], and then select the docu-
ment size.
Specify the size of the document if it is a non-stan-
dard size.
Press [X] and [Y], and then type in the document
size. [X] can be set between 148 mm and 356 mm
(5.83 inches and 14.00 inches); [Y] can be set
between 140 mm and 216 mm (5.51 inches and
8.50 inches).
Description
Select this setting when scanning a single-sided
document.
Select this setting when scanning a double-sided
document.
Specifying document settings