Advertisement
Available languages
Available languages
Changing
Modifiers
and Options
after
pressing
Start
You can change an Option
or Modifier
anytime
before the selected
Option
or Modifier
begins.
1.
Press PAUSE/CANCEl.
once.
2.
Select the new Option
and/or Modifiers.
3.
Press START to continue
the cycle.
NOTE: If you happen
to press PAUSE/CANCEl.
twice,
the program
clears and your dryer shuts
down.
Restart the selection
process.
Changing
the Preset
Dryness
Level
Settings
If all of your loads on all Sensor Dry cycles are consistently
not as dry as you would
like, you
may change the [)reset Dryness level
settings to increase
the dryness. ]his change
will affect
all of your Sensor Dry cycles.
Your Dryness
Level settings can be adjusted
to adapt to different
installations,
environmental
conditions
or personal
preference.
There are _¢drying settings:
1 (factory
preset dryness level),
2 (slightly
dryer clothes,
approximately
15% more drying
time) and _¢(much dryer clothes,
approximately
30% more drying
time).
1.
The Dryness Level settings cannot
be changed
while the dryer is running.
2.
Press and hold the DRYNESS button
for 5 seconds.
The dryer will
beep, and "CF" will be
displayed
for 1 second
followed
by the current
drying
setting.
3.
lb select a new drying
setting,
press the DRYNESS button
again until the desired drying
setting is shown.
NOTE: While
cycling
through
the settings,
the current
setting
will not flash, but the other
settings will flash.
4.
Press START to save the drying
setting.
5.
[he drying
setting you selected
will become
your new preset drying
setting for all Sensor
Dry cycles.
DRYING
RACK OPTION
Use the Drying
Rack to dry items such as sweaters and pillows
without
tumbling.
The drum
turns,
but the rack does not move.
If your model does not have a drying
rack, you may be able to purchase
one for your model.
lb find out whether
your model
allows
drying
rack usage and for information
on ordering,
please refer to the front page of the manual
or contact
the dealer from whom
you purchased
your dryer.
NOTE: The rack must be removed
for normal
tumbling.
Do not use the automatic
cycle with
the drying
rack.
To use the drying rack
1.
Open dryer door.
A. btont
edge
2.
Place drying
rack inside dryer drum, positioning
the back wire on the ledge of the inner
dryer back paneh
Push down on front edge of drying
rack to secure at the front of the
dryer.
A
..............
A. Dryer rack front edge
B. Dryer back panel
3.
Put the wet items on top of the rack. leave space between
the items so air can reach all
the surfaces.
NOTE: Do not allow
items to hang over the edge of the rack.
Advertisement
