Maytag MGD6400TB - Bravos Gas Dryer Use And Care Manual page 18

Cycle tips
• Dry most loads using the preset cycle settings.
• Refer to the Sensor Dry or Timed Preset Cycle Settings chart (in the "Cycles" section) for a
guide to drying various loads.
• Drying temperature and dryness level are preset when you choose a Sensor Dry
Cycle. You can select a different dryness level, depending on your load, by pressing
Dryness and choosing More, Normal, less or Damp.
NOTE: You cannot use the Timed Cycle Adjust and you cannot choose a Temperature
with the Sensor Dry Cycles.
• If you wish to adjust the cycle length of a Timed Cycle, press the Timed Cycle Adjust
up or down arrows. Adjust the temperature of a Timed Cycle by pressing |emp until
the desired temperature is selected.
NOTE: You cannot choose a dryness level with Timed Cycles.
STATUS LIGHTS
Follow the progress of your dryer with the drying Status indicator lights.
Wrinkle Prevent Setting
The Wrinkle Prevent setting light illuminates when this option is selected. This indicator stays
on during the Wrinkle Prevent setting.
Indicator lights
Other indicator lights show Cycle, Modifiers, Options and Cycle Signal settings selected. The
display shows the estimated or actual time remaining.
CYCLES
Select the drying cycle that matches the type of load you are drying. See Sensor Dry or Timed
Preset Cycle Settings charts.
SENSOR DRY TIM_D
COOL WRINKLE
SENSING WET DAMP DOWN DRY PREVENT
,,o • • • • Oj
Sensing
• In a Sensor Dry Cycle, the Sensing light illuminates until a wet item is detected.
• In a Timed Cycle, the Sensing light illuminates at the beginning of a cycle and turns off
5 minutes into the cycle.
Wet
The Wet light illuminates at the beginning of a Sensor Dry Cycle if a wet item is detected.
• in a Sensor Dry Cycle, if a wet item is not detected after approximately 5 minutes, the
dryer goes directly into Cool Down. The Cool Down and the Wrinkle Prevent setting
indicators will illuminate, if selected.
• In a Timed Cycle, wet items are not detected. [he dryer will continue to run for the length
of time selected, and the Wet light will illuminate. ]he damp light will not illuminate.
Damp
The Damp light illuminates in a Sensor Dry Cycle when the laundry is approximately 80%
dry. Damp Dry Chime beeps, if selected. See "Options."
Cool Down
The Cool Down light illuminates during the cool down part of the cycle. [aundry cools for
ease in handling.
Dry
The Dry light illuminates when the drying cycle is finished. This indicator stays on during the
Wrinkle Prevent setting.
DRY CYCLES
Sensor Dry Cycles
Sensor Dry Cycles allow you to match the cycle to the load you are drying. See the following
Sensor Dry Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and automatically adjusts the drying
time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such as work clothes and sheets.
Wrinkle Control
Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business
clothes and permanent press blends.
Delicate
Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses or washable
knit fabrics.
18