Jumper Blocks; Front Panel Audio Connector/Jumper Block; Location Of The Jumper Blocks - Intel BOXD875PBZLK Technical Product Specification

Intel Desktop Board D875PBZ Technical Product Specification

2.9 Jumper Blocks

CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, the Desktop Board
D875PBZ could be damaged.
Figure 23 shows the location of the jumper blocks on the Desktop Board D875PBZ.
Item Description
A

Front panel audio connector/jumper block

B BIOS Setup configuration jumper block
2.9.1 Front Panel Audio Connector/Jumper Block
CAUTION
Do not place jumpers on this block in any configuration other than the one described in Table 37.
Other jumper configurations are not supported and could damage the board.
This connector has two functions:
•
With jumpers installed, the audio line out signals are routed to the back panel audio line out
connector.
•
With jumpers removed, the connector provides audio line out and mic in signals for front panel
audio connectors.
72
A
2
1
9 10
J8A1
B
1 3
J7J2
Figure 23. Location of the Jumper Blocks
OM15887
Reference Designator
J8A1
J7J2