Audio Connectors - Intel BOXD875PBZLK Technical Product Specification

Intel Desktop Board D875PBZ Technical Product Specification

1.9.3 Audio Connectors

1.9.3.1 Auxiliary Line In Connector
A 1 x 4-pin ATAPI-style connector connects the left and right channel signals of an internal audio
device to the audio subsystem.
For information about
The location of the optional auxiliary line in connector
The signal names of the optional auxiliary line in connector
1.9.3.2 Front Panel Audio Connector
A 2 x 5-pin connector provides mic in and line out signals for front panel audio connectors.
For information about
The location of the connector
The signal names of the front panel audio connector
✏
NOTE
The front panel audio connector is alternately used as a jumper block for routing audio signals.
Refer to Section 2.9.1 on page 72 for more information.
1.9.3.3 ATAPI-Style CD-ROM Connector
A 1 x 4-pin connector connects an internal ATAPI CD-ROM drive to the audio mixer.
For information about
The location of the ATAPI-style CD-ROM connector
The signal names of the ATAPI-style CD-ROM connector
36
Refer to
Figure 17, page 61
Table 21, page 62
Refer to
Section 2.8.3, page 68
Table 22, page 62
Refer to
Figure 19, page 66
Table 23, page 62