Intel D875PBZ Quick Start Manual
Hide thumbs
Also See for D875PBZ:
- Product manual (98 pages) ,
- Specification update (29 pages) ,
- Quick reference (22 pages)
Related Manuals for Intel D875PBZ
Summary of Contents for Intel D875PBZ
-
Page 1: Quick Start Guide
Quick Start Guide Viglen Product Description: Intel D875PBZ Motherboard Viglen Order Code: PMPBZ001 iglen System: Genie Pro • Product photo Page 1 of 17... -
Page 2: Product Specification
Upgradeable? Onboard audio fitted? Type ADI 1985 (SoundMax) Front facing audio header Yes 1 Intel USB header and Intel front audio header and type “2 USB 2.0 ports and 2 Audio connectors (Line In & Out)” Audio Upgradeable? Onboard network fitted? - Page 3 No of channels? Manufacturer? Model Number? Speed? Number of IDE channels 4 IDE Number of Serial ATA Maximum number of disks 6 (Chassis can only hold a maximum of 3 disks) Rear I/O connectors PS/2 mouse port RJ-45 LAN port PS/2 keyboard port Audio Line In 6 x USB 2.0 ports...
-
Page 4: System Board Components
AA Front panel USB connectors Intel 82875P MCH BB Chassis intrusion connector DIMM Channel A sockets CC Battery DIMM Channel B sockets DD Intel 82801EB I/O Controller Hub (ICH5) I/O controller EE PCI bus add-in card connectors Power connector Page 4 of 17... - Page 5 • Back Panel Connectors The motherboard external IO connectors are attached to a metallic I/O shield. This shield serves several purposes: • It protects the sensitive motherboard from any external EMC interference. • It stops the computer from interfering with other electrical devices. •...
-
Page 6: Memory Configurations
• Memory Configurations The Intel 82875P MCH component provides two features for enhancing memory throughput: • Dual Channel memory interface. The board has two memory channels, each with two DIMM sockets, as shown in Figure 3 • Dynamic Addressing Mode. Dynamic mode minimises overhead by... - Page 7 Dual Channel Configurations with Dynamic Mode (All DIMMs matched) Figure 4. Examples of Dual Channel configurations with Dynamic Mode Throughput Configurations Characteristics Levels Highest Dual Channel with Dynamic mode All DIMMs matched (Example configurations are shown in Figure 4) Dual Channel without Dynamic mode - DIMMs matched from Channel A to Channel B - DIMMs not matched within channels Single Channel with Dynamic Mode...
- Page 8 Dual Channel Configuration without Dynamic Mode DIMMs not matched within channel DIMMs match Channel A to Channel B Figure 5. Examples of Dual Channel Configurations without Dynamic mode Throughput Configurations Characteristics Levels Highest Dual Channel with Dynamic mode All DIMMs matched Dual Channel without Dynamic mode - DIMMs matched from Channel A to Channel B - DIMMs not matched within channels...
- Page 9 Single Channel Configuration with Dynamic Mode (Single DIMM or DIMMs matched within channel) Figure 6. Examples of Single Channel Configurations with Dynamic mode Throughput Configurations Characteristics Levels Highest Dual Channel with Dynamic mode All DIMMs matched Dual Channel without Dynamic mode - DIMMs matched from Channel A to Channel B - DIMMs not matched within channels Single Channel with Dynamic Mode...
- Page 10 Single Channel Configurations without Dynamic Mode (DIMMs not matched) Figure 7. Examples of Single Channel Configurations without Dynamic mode Throughput Configurations Characteristics Levels Highest Dual Channel with Dynamic mode All DIMMs matched Dual Channel without Dynamic mode - DIMMs matched from Channel A to Channel B - DIMMs not matched within channels Single Channel with Dynamic Mode Single DIMM or DIMMs matched with a channel...
- Page 11 Supported Memory Module DDR Configurations • 2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported. • 4 GB maximum total system memory. •...
-
Page 12: System Board Jumper Settings
• System Board Jumper Settings The Configuration Jumper (J7J2) allows the user to enter the configuration mode, and to recover from a corrupted BIOS update. The following figure shows the location of the header on the motherboard. The audio jumper block (J9A2) allows the implementation of front panel audio. - Page 13 Table 12: Front Panel Audio Jumper Settings Function Jumper Configuration J8A1 Normal 5 – 6 The audio line signals are routed back to the line connector. 9- 10 Front audio none Audio line out and mic in signals are available for front panel cable audio connectors on this connector when no jumpers are installed.
- Page 14 • Motherboard Connectors There are connectors on the motherboard for FAN, IDE, Power supply, CD audio, Floppy, IDE, & Front Panel Connectors. The location and/or details of these connections are shown below. Motherboard Connectors Page 14 of 17...
-
Page 15: Front Panel Connectors
• Front Panel Connectors The following are all connectors situated along the front edge of the motherboard. They are often connected to buttons and LED’s situated on the front panel. Note: Power LED single colour LED + pin 2 , Dual colour LED + pin 4 Front panel connectors A- Hard Disk L.E.D. -
Page 16: Upgrading The Cpu
The Pentium 4 processor together with Level 2 cache chips are housed in a protective package. The design of the D875PBZ computer makes it a simple job to replace or upgrade the processor. To do so please refer to figure 15 and follow the instructions below: 1. - Page 17 SATA: QFE Update † QFE#812415 384 KB 12 Feb 2003 SATA RAID: Intel Application Accelerator 3.0.0.2344 7.58 MB 31 Mar 2003 Note: - All the above drivers are PC99 certified. † These drivers are available only on request due to licensing requirements; the appropriate drivers will be supplied with your system.