Adapter For S/Pdif Back Panel Connector; Flex 6 Audio Subsystem Block Diagram - Intel BOXD875PBZLK Technical Product Specification

#
INTEGRATOR'S NOTE
To access the S/PDIF signal with the 5.1 Digital Shared Jack option, connect an 1/8-inch stereo
phone plug to RCA jack adapter/splitter as shown in Figure 10.
Figure 11 is a block diagram of the Flex 6 audio subsystem.
82801ER (ICH5-R)
I/O Controller Hub
For information about
The front panel audio connector
The back panel audio connectors
Connect to
S/PDIF output
on Back Panel
1/8-inch Stereo
Phone Plug
Figure 10. Adapter for S/PDIF Back Panel Connector
AD1985
AC '97 Link
Audio Codec
Figure 11. Flex 6 Audio Subsystem Block Diagram
RCA Jack
Left Channel
(White, if colored)
Connect to 5.1
speaker system or
an S/PDIF decoder
OM16108
Rear Left and Right Out
Front Left and Right Out
Center and LFE (Subwoofer) Out
S/PDIF
Line In
Mic In
CD-ROM
Auxiliary Line In
Refer to
Section 2.8.3, page 68
Section 2.8.1, page 58
Product Description
OM16109
35