Checking job integrity following a paper jam
Printer areas
Troubleshooting Guide
There is a slight possibility of duplicate or missing pages when a
paper jam occurs while a job prints. For that reason, you should
check for job integrity once the job has been printed.
Follow this procedure:
1. The printer offsets the rest of the job following a paper jam.
Locate that section.
2. Check this section and the sheets immediately before the first
offset sheet to see if there are any missing or duplicate
sheets in the job.
3. Check the output for data missing from the pages.
This section provides illustrations of the various areas of the
printer where jams may occur.
The following illustration shows all the jam clearance areas for
the 96/4635/180 printer.
Area 8
Area
Areas 2,
6
3,4,5,7,
9,10
The following illustrations show the individual jam clearance
areas of the 96/4635/180 printer.
Clearing paper misfeeds and jams
Areas 17, 18
Area
Areas
Area
Areas
13
11,12
13
14,15,
16
Areas
19, 20
Areas
11,12
5-7