Resolving Printer Problems - Xerox DocuPrint 155 Troubleshooting Manual

Symptom
Papers are thrown around
the stacker.
Paper stack falls over or
slides around the bin
Printing stops and the
printer console displays a
message indicating that an
incorrect paper size is
loaded in a feeder tray.
Troubleshooting Guide
7.

Resolving printer problems

This chapter describes various system problems and suggests
corrective actions.
Probable cause
Someone unloaded paper
by opening the top cover of
the stacker bin.
Excessive paper curl
Incorrect paper size, a
misfeed in feeder trays 3 or
4, or a damaged sheet.
Action
Unload the bin following the normal
procedure. See "Unloading Stacker bin" in
Guide to Performing Routine Maintenance).
Try adjusting for paper curl (See "Paper curl
and paper jams" in Guide to Performing
Routine Maintenance
1. Check the paper in the indicated tray.
2. Check trays 3 and 4, and remove any
miisfed sheets.
3. If the paper is not the correct size, load
the correct size paper.
If the paper size is correct, press the
Continue button to resume printing.
7-1