Stock Properties > Advanced Stock Setup
Option / Setting
Default Value
Paper Jams
If a paper jam occurs, a fault screen displays a message on the press control panel
indicating in which area the jam is situated. Follow the instructions provided for clearing
the jam and resuming press operation.
For more information, refer to
Paper Jam Information
Before clearing paper jams, always refer to
Warning
When removing jammed paper, make sure that no pieces of jammed paper are left in
the press. A piece of paper remaining in the press can cause fire. If a piece of paper is
stuck in a hidden area or paper is wrapped around the fuser unit or rollers, do not remove
it forcefully. You can get injured or burned. Switch off the press immediately and contact
the Customer Support Center.
®
®
Xerox
Versant
3100 Press
User Guide
Adjustment Step
Available Range
Increments
Moderate Down-
ward
Medium Down-
ward
Severe Downward • Custom Curl
Fault
Messages.
Fault
Information.
Troubleshooting
Recommended
Incremental Ad-
justment
Small) Upward
or Slight (Very
Small) Down-
ward
Correction:
Moderate
(Small) Up-
ward or Moder-
ate (Small)
Downward
• Custom Curl
Correction:
Medium Up-
ward or Medi-
um Downward
• Custom Curl
Correction:
Severe (Large)
Upward or
Severe (Large)
Downward
7-29