Configuring Novell Groupwise - Nortel BCM 4.0 Manual

4 Select Program, and then click Add Program.
The Program page appears.
5
Type nmlnadbk.exe in the Program name box. Ensure the Command line box is empty.
6 Set Enabled/disabled to ENABLED.
7 Select the time and frequency that you want the update utility to run.
8
Click Save, and then close the dialog box.
Notes updates the address book based on the specified schedule.
Password prompts
By default, Lotus Notes prompts for a Notes password when you access an application linked to
Lotus Notes. When Unified Messaging for Lotus Notes is installed, you must enter the Notes
password twice - when you start Notes, and the first time you access the Unified Messaging folder
during the Notes session. If desired, users can disable the Notes password prompt for the Desktop
Messaging folder.
To disable the Notes password prompt for Unified Messaging
1 In Notes, choose File> Tools> User ID.
The Enter Password dialog box appears.
2
Type your Notes password, and then click OK.
The User ID dialog box appears.
3
Check the option: Don't prompt for a password from other Notes based programs.
4
Click OK.

Configuring Novell GroupWise

The administrator must first install Unified Messaging on the Windows Terminal Server. Once
this is done, each Citrix Thin Client user must add Unified Messaging to their client computer
Novell Default Settings mail profile.
Automatic Configuration
Users can automatically add Unified Messaging to their Novell Default Settings mail profile by
choosing Start-> Programs-> CallPilot Desktop Messaging-> Add CallPilot to Default Mail
Profile.
The automatic Novell GroupWise configuration is only available when the Windows Terminal
Server administrator has published the Window's desktop. Otherwise, all users must manually
configure Novell GroupWise.
Manual Configuration
Users can manually add Unified Messaging to their Novell Default Settings mail profile.
Chapter 3 Installing and configuring Unified Messaging
BCM 4.0 Unified Messaging Configuration Guide
59