Kyocera KM-2560 Operation Manual page 146

FAX Operation (Advanced)
5-62
1 Register the encryption key you have arranged with the receiving system.
(Refer to Registering an Encryption Key on page 5-60.) When an
encryption key has already been registered, go to the next step.
2
Press the Send key.
3
Place the originals.
4 Press [FAX No. Entry].
5 Use the numeric
keys to enter fax
number of the other
party, and press
[Encrypted
Transmission].
NOTE:
When encrypted transmission has been set to a destination in the
Address Book or One-touch keys, you can use the destination.
6 Press [On] and
select the encryption
key number.
7
Press [OK] and go to step 10. When the selection of an encryption box is
required by the other party, press [Encryption Box] and go to the next step.
NOTE:
When the machine receives originals, the encryption box is not
used.
Ready to send.
Enter Destination.
FAX No . Entry
Print faxes on bo th sides
1234 5678 9
of the page.
Pause Space
Add a new FAX destination.
Enter the FAX number with the numeric keys.
Add to Addr Book Next Dest.
Status
Ready to send.
Enter Destination.
FAX No . Entry - Encrypted Transmission
Off
Encryptio n Key No.
On
Key 01
Key 02
Status
Destination
0
Sub Address
Transmissio n
Back Space
Start Speed
ECM
Encrypted
Transmissio n
On Ho ok
Cancel OK
6/6/2006 10:00
Destination
0
1/1
Not Use
Encryption
Box
Cancel OK
6/6/2006 10:00
OPERATION GUIDE