Program Dial - Kyocera KM-2560 Operation Manual

Program Dial

Registering Programs
Changing/Deleting Registration Contents
OPERATION GUIDE
You can register transmission requirements such as the other party to
which you send originals and transmission time as a program. After
registration, you can recall transmission requirements only by pressing the
program number. Also, you can assign names to programs to make
recalling programs easier and more convenient.
NOTE:
The copy function can be also registered to the program. Up to 50
programs including copying and sending functions can be registered.
When user login has been enabled, only the administrator can register.
1 Transmission requirements have been registered, press the Program key.
2
Press [Register].
3
Press the program number to be registered (1 to 50).
NOTE:
When selecting a program number that has been registered, you
can replace the currently set function with the function represented by the
program number.
4
Press [Send] and then [Next].
5
Press [Change] of
Name. Press
[Name], enter the
program name, and
press [OK]. Check
that the program
name is entered
correctly, and press
[OK].
NOTE:
For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
6
Press [Register]. The program is registered.
You can change program numbers and program names, or delete
programs.
FAX Operation (Advanced)
Program Detail: 01
No.:
0 1
Cancel
Status
Name: Change
Back Register
6/6/2006 10:00
5-47