Kyocera KM-2560 Operation Manual page 104

FAX Operation (Advanced)
5-20
2 Press [Change] of Activating Time.
3 Select [All Day] or
[Preset Time].
To forward received
originals all day,
select [All Day],
press [OK] and then
go to step 5.
To set the forwarding
time, select [Preset
Time] and go to the
next step.
4 Press [+]/[-] to enter Start Time and End Time, and then press [OK].
NOTE:
Enter the time on the 24 hours system.
5
Press [OK].
6
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
File Format Setting
If you are sending the file as an E-mail attachment or transferring it to a
folder (SMB or FTP), select PDF or TIFF as the file format.
1
Follow steps 1 to 4 of Registration of Forwarding Settings (Forward All) on
page 5-13.
2 Press [Change] of File Format.
3 Press [PDF] or [TIFF], and then [OK].
4
Press [OK].
5
Press [OK].
6
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
File Separation Setting
If you are sending the file as an E-mail attachment or transferring it to a
folder (SMB or FTP), you can choose whether the pages are separated.
1
Follow steps 1 to 4 of Registration of Forwarding Settings (Forward All) on
page 5-13.
Requirement - Activating Time
Specify the time for activating the requirements.
Print or forward the faxes received during the preset
time according to the requirements.
Start Time
All Day
0
Preset Time
End Time
0
Status
:
0
:
0
Cancel OK
6/6/2006 10:00
OPERATION GUIDE