Plug & Auto Set Up - Samsung DVD-V80 Instruction Manual

Connecting DVD-VCR to a Satellite Receiver or Other Equipment
GB
You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few examples
of the connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
TV
SCART Cable
RF coaxial cable
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
TV
SCART Cable
RF coaxial cable
14
Aerial
Aerial Connector
2
1
AV2 (DEC./EXT)
TV
AV1 (EURO AV)
Aerial
Aerial Connector
2
1
AV2 (DEC./EXT)
TV
AV1 (EURO AV)
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 13.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The menu is displayed.
Language Set
3 Select the required language by pressing the or buttons.
❷
4 Press OK to store the language selected.
Result: A message appears.
5
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6 The current time and date are displayed automatically.
Check the date and time.
if it is :
Correct, Press RETURN button twice to exit the menu.
incorrect, see page 19.
Auto preset can be performed by pressing (STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
GB
TV
AV2 (DEC./EXT)
TV
AV1 (EURO AV)
2
Auto setup
Please wait
00 %
Clock Set
Time Date Year
12 : 01 1/JAN 2003/ TUE
15