Changing The Preset Station Table; Setting The Dvd-Vcr Output Channel - Samsung DVD-V80 Instruction Manual

VCR

Changing the Preset Station Table

GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
Language : English
Install
1
User Set
Auto Power Off : Off
Screen Messages : On
2
3
Install 4
Auto Setup
Manual Setup
TV System : G
5
VCR Output CH : CH 36
6
7
TV STATION TABLE
PR CH NAME DEC
1 21 - - - -
8
2
3
4
9
5
SWAPPING : OK
DELETE : CLEAR RETURN
TV STATION TABLE
PR CH NAME DEC
1
2
3 21
- - - -
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
24
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the Install
❷
option.
Press the OK or ❿ buttons to select this option.
Result: The Install menu is displayed.
Press the corresponding or buttons, until the Manual
❷
Setup option is selected.
Press the OK or ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
Press the corresponding or buttons, until the required preset
❷
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
Press the or buttons to select required position.
❷
And then press OK again to swap the position.
On completion, press the RETURN button four times to exit the
menu.
Selecting the RF OUT Sound Mode (G-K )
You can choose the sound mode (G-K ) according to the TV set
connected to your VCR.
1 After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
❷
Install option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4 Press the OK or buttons, until the option is
TV System
❷
selected.
5 Press the OK or ❿ buttons to select G or K.
6
On completion, press RETURN to exit the menu.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the
❷
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4 Press the or buttons, until the
VCR Output CH
❷
selected.
5
Select the required output channel (CH21~CH69) by pressing the
OK or ❿ buttons.
CH21 . . CH36 . . CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 16).
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
G
TV System : G
K
VCR Output CH : CH 36
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Install
option is
Auto Setup
Manual Setup
CH:21
TV System : G
:
VCR Output CH : CH 36
CH:36
:
CH:69
25
GB