Using The Timer Programming Feature; Checking A Preset Recording; Cancelling A Preset Recording - Samsung DVD-V80 Instruction Manual

VCR

Using the Timer Programming Feature

GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
Timer Method
to be broadcast. Up to six programmes can be preset.
Standard
ShowView
1
2
3
4
5
6
7
8
9
10
STANDBY/ON OPEN/CLOSE 11
12
16
13
14
15
16
36
Before presetting a recording, check that the date and
time are correct.
Insert the cassette and press TIMER on the remote control.
Result: The timer selection is displayed.
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is displayed.
Press ❿ to select the input source.
Select the required station by pressing the , buttons or
❷
INPUT SEL. to select the AV1, AV2 or AUX input sources.
Press ❿ to select the recording day.
Select the required day by pressing the or buttons.
❷
Press ❿ to select the recording start time.
Select the required hour value by pressing the or buttons.
❷
Press ❿ to select the minutes.
Select the required minute value by pressing the or buttons.
❷
Press ❿ to select the recording stop time.
Select the required recording stop time by pressing the or
❷
buttons, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed.
Press the or buttons to select the SP (Standard Play),
❷
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
When you have finished, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
1 Press TIMER on the remote control.
Result: The timer selection is displayed.
2 Press the OK button to select Standard
Result: The TIMER PROGRAMMING
3 Press the or buttons to select the required programme.
❷
4 Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5
On completion, press RETURN twice.

Cancelling a Preset Recording

You can cancel any programmes that are:
Incorrect
LP
No longer required
1
Press TIMER on the remote control.
Result: The timer selection is displayed.
2 Press the OK button to select
Standard
Result: The TIMER PROGRAMMING
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and the broad-
cast will not be recorded.
5
On completion, press RETURN twice.
VCR
option.
menu is displayed.
VCR
option.
menu is displayed.
or
❷
4
GB
37