Playback; Pfiehrávání Pásku - Samsung VP-D73 Owner's Instruction Book

ENGLISH
Playing back a tape
Connecting to a TV which has no Audio and Video input jack
You can connect your camcorder to a TV
through a VCR.
1. Connect the comcorder and VCR with the
Audio/Video cable.
The yellow plug : Video
The white plug : Audio(L)
The red plug : Audio(R) – STEREO
only
2. Connect a TV with the VCR.
3. Set the power switch of camcorder to
PLAYER.
4. Turn on the TV and VCR.
Set the input selector on the VCR to LINE.
Turn on the TV and select the channel reserved for your VCR on the TV.
5. Playback a tape.

Playback

You can play the recorded tape in PLAYER mode.
1. Connect a power source and
Set power switch to PLAYER.
Set the mode switch to CAMCORDER.
(VP–D75(i)/D76(i)/D77(i) only)
2. Insert a tape you want to see.
3. Using (FF) and (REW) buttons, find the first
position that you want to see.
4. Press the (PLAY/STILL) button.
The picture you recorded appears on the TV
after a few seconds.
If the tape reaches its end during playback,
the tape will rewind automatically.
Reference
It is best to decrease the volume of the built-in speaker when your
camcorder is connected to the TV.
The playback mode (SP/LP) is selected automatically.
PÞehr‡v‡n' p‡sku
Pfiipojení k TV, která nemá Audio a Video vstupní konektor
CAMCORDER
VCR
ALARM IN 1 2 ALARM OUT 3 ALARM RESET 4 GND 5 TRIGGER OUT
TAPE END OUT 6 7 SERIES OUT GND 8 SERIES IN 9 10 1 SHOT REC IN
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10
OUT IN
OUT IN
TV
S-VIDEO S-VIDEO
VIDEO
(L)
AUDIO
(R)
PÞehr‡v‡n'
Nahranou pásku mÛÏete pfiehrávat v reÏimu PLAYER.
1. Pfiipojte zdroj napájení a nastavte pfiepínaã na pozici PLAYER.
PLAYER
PLAY/
STILL
Doporuãujeme sníÏit hlasitost vestavûného reproduktoru pokud
kameru pfiipojujete k televizoru.
ReÏim pfiehrávání (SP/LP) je vybrán automaticky.
Kameru mÛÏete pfiipojit k TV pfies
TV
videorekordér.
1. Pfiipojte videokameru k videorekordéru
pomocí Audio/Video kabelu.
Îlut˘ : Video
Bíl˘ : Audio (lev˘)
âerven˘ : Audio (prav˘)-pouze stereo
ANTENNA
2. Pfiipojte TV k videorekordéru.
3. Nastavte pfiepínaã kamery na
reÏim PLAYER.
4. Zapnûte TV a videorekordér.
Nastavte vstupní voliã videa na LINE.
Zapnûte TV a vyberte kanál urãen˘
pro videorekordér.
5. Pfiehrávejte pásek.
Nastavte p epínaè na pozici KAMERA.
Ø
(pouze VP-D75(i)/VP-D76(i)/VP-D77(i))
2. VloÏte kazetu, kterou chcete prohlíÏet.
3. UÏitím (FF) a (REW) tlaãítek najdûte
místo, které chcete sledovat.
4. Stisknûte (PLAY/STILL).
Za nûkolik sekund se objeví na TV nahran˘
obraz.
Pokud pásek bûhem pfiehrávání dojde na
konec, pfievine se automaticky na zaãátek.
Poznámka
CZECH
65