Basic Menu - Panasonic AJ-HD150 Operating Instructions Manual

Setup menus
USER menu
<BASIC>
No.
006
007
008
009
010
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
DISPLAY 0000
SEL 0001
0002
CHARA 0000
:
H-POS
0006
:
0037
CHARA
V-POS 0000
:
0023
:
0032
CHARA 0000
TYPE 0001
MONI 0000
CONTROL 0001
– 54 –
TIME This selects what displays such as the time code are to be
T&STA superimposed onto the HD SDI OUT3, SD SDI OUT3 and
VIDEO OUT3 connector signals.
T&S&M
0: Time only
1: Time and operation mode
2: Time, operation mode and mode
<Note>
1. The following modes are displayed in accordance with the
format used.
<Format>
DVCPRO(HD)
DVCPRO(50 bps)
DVCPRO(25 bps)
DV
DVCAM
2. With the 2 (T&S&M) setting, an error message is displayed
when a warning or error has occurred.
3. REC TIME and REC DATE are displayed only during
playback of a DV or DVCAM format tape. The operation
mode is displayed for the DVCPRO (HD), DVCPRO (50
Mbps) or DVCPRO (25 Mbps) format tapes.
This selects the horizontal position of the characters used for
0
:
the time code and other displays which are superimposed
6 onto the HD SDI OUT3, SD SDI OUT3 and VIDEO OUT3
:
connector signals.
37 <Note>
1. When this menu item is set, the displays are output to the
VIDEO OUT3 connector in the DISPLAY SEL status even if
SUPER OFF has been selected. However, when MENU is
exited, the displays comply with the SUPER OFF or ON
setting.
CHARA TYPE is output to the VIDEO OUT3 connector in
the status set on the MENU.
This selects the vertical position of the characters used for the
time code and other displays which are superimposed onto
0
:
the HD SDI OUT3, SD SDI OUT3 and VIDEO OUT3
23 connector signals.
:
<Note>
32 1. When this menu item is set, the displays are output to the
VIDEO OUT3 connector in the DISPLAY SEL status even if
SUPER OFF has been selected. However, when MENU is
exited, the displays comply with the SUPER OFF or ON
setting.
CHARA TYPE is output to the VIDEO OUT3 connector in
the status set on the MENU.
WHITE This selects the display type for the SETUP MENU, etc. and
W/OUT the displays superimposed onto the HD SDI OUT3, SD SDI
OUT3 and VIDEO OUT3 connector signals.
0: White characters on a black background
1: White characters with black edges
MANU This sets whether the recorder is to be forcibly set to the EE
AUTO status and the player's playback signals are to be output to
the monitor by pressing the PLAYER button on the recorder
when the monitor has been connected only to the recorder
during deck-to-deck editing.
0: The EE status is not forcibly established.
1: The EE status is forcibly established, and the player's
playback signals are output.
Description
<Display>
#
DVCPRO_HD
#
DVCPRO_50
#
DVCPRO
#
DV
#
DVCAM