Basic Menu - Panasonic AJ-D750P Operating Instructions Manual

USER menu
<BASIC>
No.
000
001
002
003
0 0 4 LOCAL
005
006
The
Item Setting
Superimposed
No.
display
P-ROLL 0000
TIME
0005
0015
CHARA 0000
H-POS
0005
0012
CHARA
0000
V-POS
0018
0022
DISPLAY 0000
SEL 0001
0002
0000
ENA 0001
0002
TAPE 0000
TIMER
0001
SUPER
0000
0001
underline on the setting item denotes the initial setting.
Superimposed
display
0S
This sets the preroll time which can be set from 0 to 15 seconds
in l-second increments.
<Note>
5S
When the unit is set to automatic editing [PREVIEW, AUTO
EDIT], the unit will not operate if the preroll time is set to 0
15S
seconds.
0
This sets the position of the characters on the horizontal
plane for the time code and other super displays output to the
VIDEO OUT 3 connector.
5
<Note>
1. When setting this item, the DISPLAY SEL status is output to
12
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This sets the position of the characters on the vertical plane
0
for the time code and other super displays output to the
VIDEO OUT 3 connector.
18
<Note>
1. When setting this item, the DISPLAY SEL status is output to
22
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
TIME This selects what information is to be provided by the time code
and other super displays output to the VIDEO 3 connector.
T&STA
0: Time only.
T&S&M
1: Time and status.
2: Time, status and mode.
<Note>
The mode display is DVCPRO mode display during DVCPRO
format and DV mode display during DV format.
This selects the buttons which can be operated on the front
DIS
panel when the REMOTE/LOCAL switch has been set to
ST&EJ
REMOTE.
ENA
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER
buttons can be operated.
±12h This selects the 12 or 24 hour display for the CTL counter.
0: 12 hour display
24h
1: 24 hour display
OFF This selects whether the time code and other super display
which are output to the VIDEO OUT 3 connector is to shown.
ON
0: Not shown.
1: Shown.
- 4 5 -
Description