Panasonic AJ-HD150 Operating Instructions Manual page 52

Setup menus
SYSTEM menu
<SYSTEM>
No.
15
16
17
18
19
20
30
The underline on the setting item denotes the initial setting.
1
* : With the SD output (SD tape playback or down-conversion output)
Video output signal adjustments
A control matrix of the sdjustments is shown below.
SYSTEM menu
10: ENCODER SEL
LOCAL
REMOTE
(continued)
Item Setting
Superimposed Superimposed
No.
display display
VO SYS 0000
1
H (SD)* :
0429
:
0858
SDI SYS 0000
:
1
H (SD)*
0429
:
0858
V PHASE 0000
:
1
H (SD)*
0190
:
0380
SCH COAR 0000
1
H (SD)* 0001
0002
0003
SCH FINE 0000
:
1
(SD)*
0032
:
0064
AV PHASE 0000
:
0100
:
0200
MENU 0000
LOCK 0001
Settings
SYSTEM menu
11: SYS SC
LOCAL
REMOTE
LOCAL
REMOTE
– 52 –
Description
–429 This enables the system phase to be adjusted in 74ns steps.
: -: The phase is advanced.
0 +: The phase is delayed.
:
<Note>
If setting operation is performed, the setting value does not
429
return to factory (default) setting.
This enables the SDI OUT system phase to be adjusted in
–429
:
74ns steps.
0 -: The phase is advanced.
:
+: The phase is delayed.
429
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
–190 This enables the video system phase to be adjusted in 148ns
:
steps.
0 -: The phase is advanced.
:
+: The phase is delayed.
190 <Note>
In the case of the SD down-converter output from the HD
playback tape (when the option has been installed), the video
phase is fixed.
0 This enables the SCH phase to be adjusted in 90-degree
90 steps.
180 -: The phase is advanced.
+: The phase is delayed.
270
(The SC phase changes but the H phase remains
unchanged.)
This enables the SCH phase to be adjusted in a total variable
–32
:
range of +/-45 degrees or more.
0 -: The phase is advanced.
:
+: The phase is delayed.
32 (The SC phase changes but the H phase remains
unchanged.)
This enables the phase of the audio output to be adjusted to
–100
: the video output by 20.8us.
0 -: The audio output phase is moved ahead of the video output.
: +: The audio output phase is delayed from the video output.
100
OFF This selects whether to establish or release the system file
lock mode.
ON
0: The system file lock is released (changes can be made).
1: The system files lock is engaged (no changes can be
made).
SYSTEM menu
SYS SC
SYS H
Unit
Unit
External encoder
remote controller
Item adjusted
SETUP menu
VIDEO LEVEL
CHROMA LEVEL
SET UP/HUE
Unit
External encoder
remote controller