Tape Protect Menu - Panasonic AJ-HD150 Operating Instructions Manual

Setup menus Setup menus
USER menu
<TAPE PROTECT>
No.
400
401
402
403
The underline on the setting item denotes the initial setting.
<Note>
The cumulative standby time at the same tape position increases when transmitting
programs or otherwise using identical materials repeatedly.
Item Setting
Superimposed Superimposed
No.
display display
STILL 0000
TIMER 0001
0002
0003
0004
0005
0006
0007
0008
SRC 0000
PROTECT 0001
DRUM 0000
STDBY 0001
STOP 0000
PROTECT 0001
– 64 –
0.5s This selects the time to be taken until the unit goes into the tape
5s protection mode when it is left standing in the stop or search still
10s (JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
20s
30s
40s
50s
1min
2min
STEP This selects the operation during the tape protection mode
HALF when the unit is left standing in the still status during the
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the HALF LOADING mode when the total time for which the
unit is left standing in the still status reaches 30 minutes.
This selects the drum operation in the STANDBY OFF mode.
OFF
ON 0: The drum stops rotating.
1: The drum continues rotating.
STEP This selects the operation in the tape protection mode when
HALF the unit has been left standing in the STOP mode.
0: STEP FWD
1: HALF LOADING
<Note>
When STEP FWD is selected, the unit is automatically
transferred to the HALF LOADING mode when the total time
during which it has been left standing in the STOP mode
reaches 30 minutes.
Description