Set-Up Menus; Basic Menu - Panasonic AJ-D230H Operating Instructions Manual

Set-up Menus

BASIC menu

Item
S u p e r i m p o s e d
No.
d i s p l a y
000 DISPLAY SEL 0000
CHARA H-POS 0000
001
CHARA V-POS
002
003 CHARA TYPE
005 MENU INHIBIT 0000
The underlined number and item are the factory settings.
.
<Notes>
While setting " CHARA H-POS" , " CHARA V-POS" , and " CHARA TYPE" , the counter display can be
viewed by holding down the MODE button, allowing you to check the settings. You can also use the
DATA+ and DATA– buttons while holding down the MODE button to adjust the values while you are
.
viewing them.
To set ON or OFF for the " MENU INHIBIT" item, first press the DATA+ or DATA– button while holding
down the MODE button, and then select the setting.
Continuously after performing the settings, press the SET button (REC button) to exit the menu. The
MENU INHIBIT setting takes effect starting with the next menu mode.
Setting
S u p e r i m p o s e d
No.
d i s p l a y
OFF
This sets what is to be displayed for the superimpose
0001 TIME signals output from the MONITOR OUT connector.
0002 T, STA 0: No display
1: Only the time is displayed.
2: The time and operation mode are displayed.
This sets the horizontal position of the superimposed
0
0001 1 characters (8 settings to choose from).
:
0003 3
:
0007 7
0
0000 This sets the vertical position of the superimposed
1
0001 characters (8 settings to choose from).
:
0003 3
:
0007
7
0000
This
WHITE
0001
W/OUT superimposed display and menu display.
0: White characters appear on a black back ground.
1: White characters with black borders appear.
OFF
This selects whether or not the menu settings are to be
0001 ON fixed.
0: The settings are not fixed.
1: The settings are fixed (and cannot be changed).
24
Description of settings
selects the type of characters for the