User Menu; Basic Menu - Panasonic AJ-D455 Operating Instructions Manual

Setup menus

USER menu

<BASIC>
No.
000
001
002
003
004
* The SERIAL OUT 3 con-
nector functions only
when the AJ-YA455P
serial interface board
(optional accessory) is
used.
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
P-ROLL 0000
.
.
.
TIME
0005
.
.
.
0015
CHARA 0000
.
.
.
H-POS
0004
.
.
.
0016
CHARA 0000
.
.
.
V-POS
0018
.
.
.
0022
DISPLAY 0000
SEL 0001
0002
0003
0004
0005
0006
LOCAL 0000
ENA 0001
0002
0S This sets the preroll time which can be set from 0 to 15 seconds
.
.
. in 1-second increments.
5S <Note>
.
.
. The unit will not operate if the preroll time is set to 0 seconds
15S when the unit is set to automatic editing (PREVIEW, AUTO
EDIT COMMAND) from an external controller.
0 This sets the position of the characters on the horizontal plane
.
.
. for the time code and other super displays output to the
4 VIDEO OUT 3/SERIAL OUT 3* connector.
.
.
.
<Note>
When setting this item, the DISPLAY SEL status is output to
16
VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has been
set. However, when the menu is exited, operation complies
with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL OUT 3*
according to the status set in the menu.
This sets the position of the characters on the vertical plane
0
.
.
.
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3* connector.
18
.
.
.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
22
to VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has
been set. However, when the menu is exited, operation
complies with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL
OUT 3* according to the status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
For selecting the time code and/or other information which is to
TIME
be shown on the superimposed display at the VIDEO OUT 3/
T&STA
SERIAL OUT 3* connector.
T&S&M
0: Time only
T&RT
1: Time and operation mode
T&YMD
2: Time, operation mode and mode
T&MDY
3: Time and REC TIME
T&DMY
4: Time and REC DATE (year/month/day)
5: Time and REC DATE (month/day/year)
6: Time and REC DATE (day/month/year)
<Notes>
1. The mode display is DVCPRO during DVCPRO playback,
DV during DV playback, and DVCAM during DVCAM
playback.
2. When 2 (T&S&M) is set, an error message will appear
when a warning or error has occurred.
3. REC TIME and REC DATE are displayed during DV or
DVCAM playback only. The operation mode is displayed
during DVCPRO playback.
DIS This selects the buttons which can be operated on the front
panel when the REMOTE/LOCAL switch has been set to
ST&EJ
REMOTE.
ENA
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons can be operated.
22
Description