Panasonic AJ-HD150 Operating Instructions Manual page 100

Specifications
HD SDI output system phase:
SD SDI Y output gain:
SD SDI P output gain:
B
SD SDI P output gain:
R
SD SDI Y black level:
SD SDI output system phase:
Composite video output gain:
Composite chroma output gain:
Composite chroma phase:
Composite video output setup:
Composite video output
system phase:
Composite video output SC phase: ±180°
SD SDI and composite output
video phase:
HD SDI output video phase:
AUDIO
Digital Audio
Sampling frequencies:
Quantizing:
Frequency response:
Dynamic range:
Distortion:
Crosstalk:
Wow & flutter:
Headroom:
Cue Track
Frequency response:
Audio Input Connector
Analog input
(CH1/CH2/CH3/CH4):
Digital input
(CH1/CH2, CH3/CH4,
CH5/CH6, CH7/CH8):
Serial digital input:
Cue track input:
Audio Output Connector
Analog output
(CH1/CH2/CH3/CH4):
Digital output
(CH1/CH2, CH3/CH4,
CH5/CH6, CH7/CH8):
Serial digital output:
Cue track output:
Monitor output:
Headphones:
Other Input/Output Connectors
Time code input:
Time code output:
RS-422A input:
RS-422A output:
RS-232C:
Parallel input/output:
Encoder remote:
Weight and dimensions when shown are approximate.
Specifications are subject to change without notice.
.
±0.5H (1100 samples, 13.5 ns steps)
–¶ to +3 dB
–¶ to +3 dB
–¶ to +3 dB
±10%
±0.5H (429 samples, 74ns steps)
–¶ to +3 dB
–¶ to +3 dB
±30°
±14 IRE
±0.5H (429 samples, 74ns steps)
±0.44H (380 samples, 74ns steps)
±0.45H (1000 samples, 27ns steps)
48 kHz (synchronous with video)
16 bits
20 Hz to 20 kHz ± 1.0 dB (at the reference level)
Better than 90 dB (1 kHz, emphasis OFF)
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Less than –80 dB (1 kHz, between 2 channels)
Below measurable limit
20 dB
300 Hz to 6 kHz ± 3 dB
XLR 4, 600 /high impedance selectable, +4/0/–20 dBu selectable
BNC 4, AES/EBU format
BNC 1, complies with SMPTE 292M
XLR 1, 600 /high impedance selectable, +4/0/–20/–60 dBu selectable
XLR 4, low impedance, +4/0/–20 dBu selectable
BNC 4, AES/EBU format
BNC 3, complies with SMPTE 292M
XLR 1, low impedance, +4/0/–20 dBu selectable
XLR 2, low impedance, +4/0/–20 dBu selectable
1/4" phone jack, variable level, 8
XLR 1, 0.5 to 8 Vp-p, 10 k
XLR 1, low impedance, 2.0 Vp-p±0.5Vp-p
D-sub 9-pin, RS-422A interface
D-sub 9-pin, RS-422A interface
D-sub 25-pin, RS-232C interface
D-sub 50-pin
D-sub 15-pin
– 100 –