Ricoh Aficio SP C240SF User Manual page 154

3. Using the Printer Function
Problem
PictBridge is not available.
3
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
Printing is disabled.
Printing is disabled.
Printing is disabled.
152
Cause
There is a problem with the USB
connection or the PictBridge
settings.
You have connected multiple
digital cameras.
The specified number exceeds
the maximum number that can
be printed at a time.
There is no paper of the
specified size remaining.
The paper size setting for this
tray cannot be printed on the
machine.
Solution
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
Connect one digital camera
only.
Do not connect multiple
cameras.
The maximum specifiable print
quantity at a time is 999.
Respecify the quantity to 999 or
less, and then retry printing.
There is no paper of the
specified size remaining.
If you have to use paper that is
not of the specified size,
perform continue printing using
mismatched paper or cancel the
print job. For details, see p.140
"If a Paper Mismatch Occurs".
Select the paper size setting that
can be printed on the machine.