Basic Operation For Scan To Usb - Ricoh Aficio SP C240SF User Manual

Using the [Pause/Redial] key
Press the [Pause/Redial] key to select the last used destination.
• When you specify a scan destination, the machine's scan settings change automatically according
to the information registered for that destination in the Address Book. If necessary, you can change
the scan settings using the control panel.
• The [Pause/Redial] key is not effective for the first scan job after the machine is turned on.
• To select destinations not registered as Quick Dial entries, use the [Address Book] key.
• For details about how to specify destinations using the [Address Book] key, see p.184 "Basic
Operation for Scan to E-mail/FTP/Folder".

Basic Operation for Scan to USB

This section describes the basic operation for sending scanned files to a USB flash disk.
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
CES183
CES171
Scanning Using the Control Panel
5
187