PLC-ET30L Expand Serial Command Functional Specifications
6.9 Other Status Read Command Table
Status Read command
CR_STATUS [CR]
CR_SIGNAL [CR]
CR_VMUTE [CR]
CR_FREEZE [CR]
CR_TEMPFAIL [CR]
CR_TEMP [CR]
7ÿ
Error Code Table
Error Code
?
000
102
103
201
301
402
101
Item
Get operating status of Projector
Get status of singal existence
Get setting status of No show
Get setting status of Freeze
Get temperature when sensors approach abnormal
temperature
Get current temperature
Contents
-When the received data cannot be decoded
-Parameter decignation error (wrong digit number,
including invalid value, etc.)
Normal reception (This is "Not" error)
Directly specified value or values are out of range.
(Not reflected)
Command mismatched to Hardware (the command
is for Optional function which is not implemented)
Incremented or decremented value or values are
beyond upper or lower limits.
Not executable due to screen capturing in process.
Prompting reissue of the command after a while.
Not executable due to PIN code in operation.
Prompting reissue of the command after a while.
Error not applicable to above errors
14/62