Other Status Read Command Table - Sanyo PDG-DHT8000L - 8000 Lumens Specifications

PDG-DHT8000L Expand Serial Command Functional Specifications
CR_PIPSIZE[CR]
CR_PIPFRAMELOCK[CR]
CR_PIPSTORE[CR]
CR_EDGEBLENDING[CR]
CR_BLEND[CR]
CR_BLENDBLK[CR]
CR_BLENDTESTPAT[CR]
CR_COLORMATCHING[CR]
CR_CMMSXY_%1[CR]
CR_CMMSL_%1[CR]
CR_CMTGXY_%1[CR]
CR_CMTGG_%1[CR]
CR_CMAUTOTESTPAT[CR]
CR_CMMSTESTPAT[CR]
CR_CMTGTESTPAT[CR]
CR_DYNAMICBLACK[CR]
CR_HDMISETUP[CR]

6.8 Other Status Read Command Table

Status read command
CR_STATUS [CR]
CR_SIGNAL [CR]
CR_VMUTE [CR]
CR_FREEZE [CR]
CR_PTIMER [CR]
CR_TEMPWARN [CR]
CR_TEMPFAIL [CR]
CR_TEMP[CR]
CR_SERIALNO [CR]
CR_SHUTCOND [CR]
CR_OPTCTRLNO[CR]
CR_LENSTYPE[CR]
CR_COLWHEELTYPE[CR]
Get Menu size of "Picture in Picture"
Get setting status of Frame lock of "Picture in
Picture"
Get stored status of "Picture in Picture"
Get setting status of Edge blending
Get setting status of width of Edge blending
Get setting status of Black level of Edge blending
Get setting status of Test pattern of Edge blending
Get setting status of Color matching
Get "x","y" value of Measured of Color matching
Get "L" value of Measured of Color matching
Get "x","y" value of Target of Color matching
Get "g" value of Target of Color matching
Get setting status of Auto test pattern of Color
matching
Get setting status of test pattern(Measured) of Color
matching
Get setting status of test pattern(Target) of Color
matching
Get setting status of DynamicBlack
Get setting status of HDMI setup
Item
Get operation state of the projector
Get status of signal existence
Get setting status of Video mute
Get setting status of Freeze
Get operating status of P-Timer
Get temperature status whether it is close to abnormal
level or not
Get temperature in abnormal temperature status
Get current temperature
Get value of Serial number
Get setting status of Shutter
Get Option control No. of the projector
Get Lens type currently installed
Get Color wheel type currently installed
19/101