Cr_Lampmode Command; Cr_Lampsts Command; Cr_Projh Command; Cr_Hmlamp Command - Sanyo PLC-ET30L - 4200 Lumens Specifications

PLC-ET30L Expand Serial Command Functional Specifications

9.9.4 CR_LAMPMODE Command

Command "CR_LAMPMODE" [CR]
Details Get setting status of Lamp mode
Acceptable
Response %1
Unacceptable

9.9.5 CR_LAMPSTS Command

Command "CR_LAMPSTS" [CR]
Details Get Lamp status
Acceptable
Response %1
Unacceptable

9.9.6 CR_PROJH Command

Command "CR_PROJH" [CR]
Details Get total running time of Projector (in hours)
Acceptable
Response %1
Unacceptable

9.9.7 CR_HMLAMP Command

Command "CR_HMLAMP" [CR]
Details Get total lamp number
Acceptable
Response %1
Unacceptable
"000_%1" [CR]
"AUTO1" ------------------ Lamp Mode is Auto1
"AUTO2" ------------------ Lamp Mode is Auto2
"HIGH" -------------------- Lamp Mode is High
"NORMAL" --------------- Lamp Mode is Normal
"ECO1" ------------------- Lamp Mode is Eco1
"ECO2" ------------------- Lamp Mode is Eco2
"?" [CR]
"000_%1" [CR]
"1I" ------------------------ Lamp is ON
"1O" ---------------------- Lamp is OFF
"1X" ----------------------- Lamp Failure
"Error Code" [CR]
"000_%1" [CR]
"0000000 – 0099999"
"?" [CR]
"000_%1" [CR]
"001"
"Error Code" [CR]
53/62