Screen Control Command; Cf_Screen Command; Cf_Dzcent Command; Cf_Keystone Command - Sanyo PLC-ET30L - 4200 Lumens Specifications

PLC-ET30L Expand Serial Command Functional Specifications

8.7 Screen Control Command

8.7.1 CF_SCREEN Command

Command "CF_SCREEN_%1" [CR]
Input is Computer
%1
Input is Video
Select screen size (Available only in the normal Power ON status)
When selected input does not include specified %1, error code "101" [CR] is
Details
returned and it is not executed.Receiving "DZOOM_UP" or "DZOOM_DN"
command immediately executes the function.
Acceptable
Response
Unacceptable

8.7.2 CF_DZCENT Command

Command "CF_DZCENT_%1"[CR]
%1 "CENT" ---- Cancel Digital Zoom (CENT : "CENTER")
Cancel Digital Zoom
Details
(Available only in the normal Power ON status and Input for Computer is selected)
Acceptable
Response
Unacceptable

8.7.3 CF_KEYSTONE Command

Command "CF_KEYSTONE_%1"[CR]
"UP" ------------- Correct Keystone distortion to reduce upper part of image
"FUP" ----------- Correct Keystone distortion to reduce upper part largely
%1 "DN" ------------- Correct Keystone distortion to reduce lower part of image
"FDN" ----------- Correct Keystone distortion to reduce lower part largely
"RST" ------------ Set Keystone OFF
Change Keystone distortion correction
(Available only in the normal Power ON status)
When reached the limit of the correction level, projector accepts the command but
does not execute it.Receiving this command immediately invokes the operation.
When trying to set the value beyond available range, error code "201" is returned
Details
and the operation is not executed.
Example 1: When the correction level of the upper part has reached its upper limit
Example 2: When the upper part correction allows only another step, and then the
Acceptable
Response
Unacceptable
"NORMAL" ---------------------- Select Normal mode
"WIDE" --------------------------- Select Wide mode
"TRUE" -------------------------- Select True mode
"FULL" --------------------------- Select Full mode
"CUSTOM" ---------------------- Select Custom mode
"DZOOM_UP" ----------------- Scale up with Digital zoom
"DZOOM_DN" ----------------- Scale down with Digital zoom
"UP" ------------------------------ Select screen size with
forward swiching in possible range
"DN" ------------------------------- Select screen size with
backward swiching in possible range
"NORMAL" ---------------------- Select Normal mode
"WIDE" --------------------------- Select Wide mode
"CUSTOM" ---------------------- Select Custom mode
"UP" ------------------------------ Select screen size with
forward swiching in possible range
"DN" ----------------------------- Select screen size with
backward swiching in possible range
"000" [CR]
"Error Code" [CR]
"000"[CR]
"101"[CR] ------ when Input for Video is selected
and then the command "UP" is received.
command "FUP" is received.
"000"[CR]
"Error Code"[CR]
27/62