Konica Minolta bizhub 36 User Manual page 40

5.2 Installer-based auto install
4
In the [Readme] window, read the content and click [Next].
5
When a page for selecting menu to setup appears, select [Install printers/MFPs], and then click [Next].
Connected printers and MFPs are detected.
% For Windows Vista/7/Server 2008/Server 2008 R2, you can select [Preference for IPv4] or [Prefer-
ence for IPv6]. If the printer/MFP is detected using both IPv4 and IPv6, the selected address is pri-
oritized.
% If no printer is detected, turn this machine off, then on again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn this machine on immediately after turning it off, it may not function correctly.
bizhub 42/36
5
5-6