Machine Default - Kyocera KM-2540 Advanced Operation Manual

System Menu / Counter
System Menu
Copy
Default
Machine
Default
System Menu

Machine Default

The following items can be set for machine default.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Accessing the Machine Default Screen
Follow the steps as below to access the Machine Default screen.
1
2
3
Job
Language
Accoun
MP Tray
Setting
Register Print
Orig. Size Report
4
Enabling Auto Cassette Switching...3-12
Specifying the Paper Size...3-12
Specifying the Media Type...3-13
Registering MP Tray Paper Size...3-13
Enabling Quick Access to MP Tray Settings...3-14
Setting Media Type Properties (Paper Weight)...3-14
Setting Media Type Properties (Duplex Mode)...3-15
Setting Handling for Special Media Types...3-16
Auto Detect Originals...3-17
Orientation of Original Document...3-17
Setting Sleep Timer Timeout...3-18
Setting Low-Power Timer Timeout...3-18
Setting Auto Clear Timeout Time...3-18
Selecting Output Destination...3-18
Selecting FAX Output Mode...3-19
Select the Main Mode...3-19
Setting Notification Sounds...3-20
Silent Mode...3-20
Changing Management Code...3-20
Activating Auto Sleep...3-21
Activating Auto Clear...3-21
Auto Drum Refresh...3-22
Press the System Menu/Counter key.
Press [Machine Default].
Use the numeric keys to enter the 4 digit management code. The
default setting is 2500 for the 25 cpm model and 3000 for the 30 cpm
model.
If the correct management code has been entered, the Machine
Default screen will be displayed.
Note For security, it is recommended to change the
management code. For further details, refer to Changing
Management Code on page 3-20.
Refer to the following configuration items to configure the default
settings.
3-11