Mixed Size Originals Mode - Kyocera KM-2540 Advanced Operation Manual

Original
Original
Ready to copy.
Mixed Size Originals
1st pg. Orig
8½×11"/
Off
11×8½"
Mixed Size 8½×14"/
Copies 11×17"
Same Sized
Copies
1-30

Mixed Size Originals Mode

Using the optional document processor, the originals of different sizes
can be loaded in a batch and copied. The size of each original page is
automatically detected and each original is automatically printed to the
matching paper size or all originals printed are on the same size output
paper.
Note This operation requires the optional document processor.
Up to 30 sheets can be loaded in to the document processor at
once for Mixed Size Originals mode.
The following paper sizes can be used.
Inch models: 11 × 8 1/2" and 11 × 17", 8 1/2 × 14" and 8 1/2 × 11"
Metric models: A3 and A4, B4 and B5
Mixed Size Copies
Each copy is the same size as the original.
Copy
Same Sized Copies
All originals are output on a single size copy.
Copy
Follow the steps as below for Mixed Size Originals mode.
1
Place originals in document processor.
2
Press the Mixed Sized Originals key.
3
Press [Mixed Size Copies] or [Same Sized Copies].
For [Same Sized Copies], select the size of the first original page
Shortcut Ba
and press [Close]. Select the paper tray from the [Basic] screen.
Able to scan mix size o
one time using Docum
and copy them in unif
4
Press the Start key. Copying begins.
Note In order to correctly set the finished bind direction, set
the size of the first page of the original.
Copy Functions