Stapling - Kyocera KM-2540 Advanced Operation Manual

Staple Mode.
Turn over paper in the cassette if output does not align.
Staple Mode
Staple Position
Upper
Off
Left
Upper
1 staple
Right
1-8

Stapling

Staples sets of copies.
Note Requires the optional document finisher or built-in finisher.
The orientations of the original and corresponding staple positions are as
follows.
Original Copy
Follow the steps as below for stapling.
1
Press [Function] and then press [
2
Press [Staple].
3
Press [1 staple].
P
4
Select the staple position.
Shortcut Ba
5
Place the original and press the Start key.
If the original has been placed on the optional document processor,
copying begins automatically.
If the original is placed on the platen, Scan next original(s) is
displayed. Place the next original and press the Start key.
If all original pages have been scanned, press [Scanning finished].
Copying begins.
Orientation of Original
Platen Document
processor
Down].
Copy Functions