ReadyBoost Card
A ReadyBoost card is installed in the computer. The card is secured to the chassis, and a cable connects
the card to the system board.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Unplug the ReadyBoost cable from the system board, and then lift the card assembly from the
chassis.
To install the ReadyBoost card, reverse the removal procedure.
150 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
108).
114).