HP 5850 - Deskjet Color Inkjet Printer Reference Manual page 152
Business pc
Hide thumbs
Also See for 5850 - Deskjet Color Inkjet Printer:
- Support list (34 pages) ,
- Support telephone numbers (19 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
3.
Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward
the front of the computer until it locks into place.
4.
Connect the appropriate drive cables:
a.
If installing a diskette drive, connect the power and data cables to the rear of the drive and
connect the other end of the data cable to the connector on the system board labeled FLOPPY.
b.
If installing a second hard drive, connect the power and data cables to the rear of the drive
and connect the other end of the data cable to the next available (unpopulated) SATA
connector on the system board in the following order: SATA0, SATA1, SATA5, SATA4.
c.
If installing a media card reader, connect the USB cable from the media card reader to the
USB connector on the system board labeled MEDIA.
NOTE:
system board drive connectors.
5.
Replace the optical drive.
140 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Refer to
System Board Drive Connections on page 132
for an illustration of the
Advertisement
Table of Contents
