Memory Card Reader - HP Pro ms218 Maintenance And Service Manual

Memory card reader

Table 5-12
Symptom
Memory card reader cannot read
the memory card.
Downloaded from www.Manualslib.com
Memory card reader
Possible solution
Do not insert or remove memory cards when the memory card reader LED is flashing.
Doing so may cause data loss or permanent damage to the card reader.
Some memory cards have a Read/Write or a Security switch. Ensure the switch is set to
Write Enabled before you attempt to write data to the card.
Ensure the amount of stored data does not exceed the storage limit of the memory card.
Ensure the memory card is one of the supported types: Memory Stick (MS), Memory
Stick Pro (MS Pro), MultiMediaCard (MMC), Secure Digital (SD), Secure Digital High-
Capacity (SDHC), or Extreme Digital (xD).
Additional media card types can be supported by use of an adapter sleeve: Mini Secure
Digital (Mini SD), Micro Secure Digital (Micro SD), Reduced-sized MultiMediaCard (RS-
MMC), Memory Stick Duo (MS Duo), or Memory Stick Pro Duo (MS Pro Duo).
Ensure the memory card is fully inserted into the slot and the LED is on.
Inspect the ends of the memory cards for dirt or material that closes a hole or spoils a
metal contact. Clean the contacts with a lint-free cloth and a small amount of isopropyl
alcohol. Replace the memory card if necessary.
manuals search engine
Troubleshooting 47