b.
If you are installing a diskette drive, connect the data cable (1) and power cable (2) to the back
of the drive.
5.
If installing a new drive, connect the opposite end of the data cable to the appropriate system board
connector.
NOTE:
connector on the system board labeled SATA1. Connect a second optical drive to the orange SATA
connector labeled SATA3.
If you are installing a diskette drive, connect it to the connector on the system board labeled FLPY.
If installing a media card reader, connect the USB cable from the media card reader to the USB
connector on the system board labeled MEDIA.
Refer to
connectors.
84
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
If you are installing a SATA optical drive, connect the first optical drive to the white SATA
System Board Drive Connections on page 78
for an illustration of the system board drive