Lexmark T520 - 20ppm 8MB Par USB Pcl6 Ps3 Ppds Service Manual page 56

4520-xxx
User Error Message
52 Flash Full
53 Unformatted Flash
54 Standard Serial Error
54 Serial Option X Error
56 Standard Serial
Disabled
56 Parallel Port Disabled
58 Too Many Trays
Attached
58 Too Many Disks
Installed
61 Defective Disk
2-28
Service Manual
Explanation
This message is displayed when there is not
enough free space in the flash memory to hold
the resources that have been requested to be
written to flash.
This message is displayed when the printer
detects an unformatted flash at power on. Press
Go to clear the message. The flash is marked as
bad and normal operation continues. Flash
operations are not allowed until the flash is
formatted.
This error is displayed when a serial error
(framing or parity) is detected on the standard
serial port. This usually indicates the serial port is
not set up correctly.
This error is displayed when a serial error
(framing or parity) is detected on the optional
serial port. This usually indicates the optional
serial port is not set up correctly.
This error is displayed when data is sent to the
printer across the standard serial port, but the
port has been disabled.
This error is displayed when data is sent to the
printer across the parallel port, but the parallel
port has been disabled. Once this message is
displayed, reporting of further errors is
suppressed until the menus are entered, or the
printer is reset.
This error code is displayed when too many input
trays are attached to the printer.
This error is displayed when too many disks are
attached to the printer.
This error code is displayed when the printer
detects a defective disk. This error may occur at
power on or during disk format and write
operations. While this message displays: Press
Go to clear the message. The disk is marked
defective and normal printer operations continue.
Disk operations are not allowed with a defective
disk. The Format Disk menu is not shown.