4520-xxx
First 6
Bytes Sub
Error Code
Data - Note:
xx can be
any value
925 Service - Fuser Error (Wrong Fuser Lamp Installed)
Note: The Sub Error Codes below are only for an incorrect lamp being
installed.
EN 07 xx yy
zz 1
EN -- -- -- 2
Envelope Feeder Sub Error Codes
First 6
Bytes Sub
Error Code
Data - Note:
xx can be
any value
84 xx 17
Explanation
This error code is generated anytime an incorrect lamp is
detected.
xx=00 Lamp detection performed and found an error.
01 It took long to do lamp detection and NVRAM detected
a previous wrong lamp detected.
yy=Actual Temperature
zz=The temperature that the fuser was trying to reach.
Explanation
There is an envelope in the feeder during POST.
Diagnostic Information
2-19