Interconnect Board Assembly Removal - Lexmark T520 - 20ppm 8MB Par USB Pcl6 Ps3 Ppds Service Manual
Service manual
Hide thumbs
Also See for T520 - 20ppm 8MB Par USB Pcl6 Ps3 Ppds:
- Service manual (333 pages) ,
- Troubleshooting (1 page) ,
- Reference manual (475 pages)
Table of Contents
Advertisement
4520-xxx
Interconnect Board Assembly Removal
1. Remove the inner EMC shield.
2. Remove the engine board and shield.
3. Remove the LVPS.
4. Disconnect all cables from the interconnect board. Go to
"Interconnect Board" on page 5-14
locations for your printer.
5. Place the printer on its back and remove the mounting screws
(A).
6. Remove the interconnect board assembly.
to identify the correct jumper
Repair Information
4-39
Advertisement
Table of Contents
