Lexmark T520 - 20ppm 8MB Par USB Pcl6 Ps3 Ppds Service Manual page 52

4520-xxx
User Status Message
Restoring Factory
Defaults
Performing Self Tests
Not Ready
(Press Go)
Resetting Printer
Formatting Flash
(Do Not Power Off)
Program Flash
(Do Not Power Off)
Formatting Disk
2-24
Service Manual
Status
The printer is restoring
factory defaults.
The printer is running
the normal series of
start-up tests after it is
powered on. When the
tests are complete, the
printer returns to Ready.
The printer is in the Not
Ready state, which
means it is not ready to
receive or process data.
This message displays
when Menu is pressed
during a print job.
The printer is deleting
any print jobs in process
and restoring all settings
to user defaults.
The flash memory is
being formatted.
The flash memory is
being programmed,
which means fonts or
macros are being written
to flash memory.
The disk is being
formatted.
Action
No button actions are
possible while this
message is displayed.
No button actions are
possible while this
message is displayed.
Press Go to take the
printer out of the Not
Ready state. Press
Menu to take the
printer out of Ready
and enter the TESTS
MENU (Busy state).
Press Menu until
Reset Printer is on the
second line of the
display. Press Select
to reset the printer.
No button actions are
possible while this
message is displayed.
No button actions are
possible while this
message is displayed.
Do not perform any
button actions while
this message is
displayed.
No button actions are
possible while this
message is displayed.