Engine Board Removal - Lexmark T520 - 20ppm 8MB Par USB Pcl6 Ps3 Ppds Service Manual
Service manual
Hide thumbs
Also See for T520 - 20ppm 8MB Par USB Pcl6 Ps3 Ppds:
- Service manual (333 pages) ,
- Troubleshooting (1 page) ,
- Reference manual (475 pages)
Table of Contents
Advertisement
4520-xxx
Engine Board Removal
1. Remove the inner EMC shield.
2. Disconnect all cables from the engine board.
3. Remove the engine board mounting screws (A).
4. Remove the engine board shield mounting screw (B) from the
main drive motor assembly.
5. Remove the engine board.
Note: Anytime the engine board is replaced, the Configuration ID
must be reset in NVRAM on the new engine board. Go to
Configuration ID" on page
3-20.
"Setting
Repair Information
4-23
Advertisement
Table of Contents
