Displaying Login Information - HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual

Use the portShow command to view the NPIV attributes and all the N_Port (physical and virtual) port
WWNs under "portWwn of device(s) connected." Following is sample output for portShow:
switch:admin> portshow 2
portName: 02
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x24b03 PRESENT ACTIVE F_PORT G_PORT NPIV LOGICAL_ONLINE LOGIN NOELP LED
ACCEPT
portType: 10.0
portState: 1Online
portPhys: 6In_Sync
portScn: 32F_Port
port generation number:
portId: 630200
portIfId:
portWwn: 20:02:00:05:1e:35:37:40
portWwn of device(s) connected:
c0:50:76:ff:fb:00:16:fc
c0:50:76:ff:fb:00:16:f8
...
<output truncated>
...
c0:50:76:ff:fb:00:16:80
50:05:07:64:01:a0:73:b8
Distance: normal
portSpeed: N2Gbps
Interrupts:
Unknown:
Lli:
Proc_rqrd:
Timed_out:
Rx_flushed:
Tx_unavail:
Free_buffer:
Overrun:
Suspended:
Parity_err:
2_parity_err:
CMI_bus_err:

Displaying login information

Use the portLoginShow command to display the login information for the virtual PIDs of a port.
Following is sample output from portLoginShow:
switch:admin> portloginshow 2
Type PID
=====================================================
fe 630240
fe 63023f
fe 63023e
...
<output truncated>
...
ff 630202
ff 630201
310 Administering NPIV
148
43020005
0 Link_failure: 16
0 Loss_of_sync: 422
294803 Loss_of_sig:
0 Protocol_err: 0
0 Invalid_word: 0
0 Invalid_crc:
0 Delim_err:
0 Address_err:
0 Lr_in:
0 Lr_out:
0 Ols_in:
0 Ols_out:
0
World Wide Name
c0:50:76:ff:fb:00:16:fc
c0:50:76:ff:fb:00:16:f8
c0:50:76:ff:fb:00:17:ec
c0:50:76:ff:fb:00:17:70
c0:50:76:ff:fb:00:16:80
Frjt:
Fbsy:
808
0
0
1458
15
17
16
15
credit df_sz cos
101 2048 c scr=3
101 2048 c scr=3
101 2048 c scr=3
192 2048 c d_id=FFFFFC
192 2048 c d_id=FFFFFC
0
0