HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual page 215

switch:admin_06> portshow 7/10
portName:
portHealth: OFFLINE
Authentication: None
EX_Port Mode: Enabled
Fabric ID: 30
Front Phantom: state = Not OK
Fabric params: R_A_TOV: 0
to
Authentication Type: None
Hash Algorithm: N/A
DH Group: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
portDisableReason: None
portCFlags: 0x1
portFlags: 0x1
portType: 10.0
portState: 2 Offline
portPhys: 2 No_Module
portScn: 0
port generation number:
portId: 014a00
portIfId: 4372080f
portWwn: 20:4a:00:60:69:e2:03:86
portWwn of device(s) connected:
Distance: normal
portSpeed: N4Gbps
LE domain: 0
Interrupts:
Unknown:
Lli:
Proc_rqrd:
Timed_out:
Rx_flushed:
Tx_unavail:
Free_buffer:
Overrun:
Suspended:
Parity_err:
2_parity_err:
CMI_bus_err:
Port part of other ADs: No
7. Enter the switchShow command to verify the EX_Port (or VEX_Port), edge fabric ID, and name of the
edge fabric switch (containing the E_Port or VE_Port).
8. Enter the fcrFabricShow command to view any edge fabric's switch names and ensure links are
working as expected:
switch:admin_06> fcrfabricshow
FC Router WWN: 10:00:00:60:69:e2:03:86, Dom ID:
"fcr_meteor3"
EX_Port
------------------------------------------------------------------------
74
Pref Dom ID: 160
E_D_TOV: 0
PRESENT U_PORT EX_PORT
0
0 Link_failure: 0
0 Loss_of_sync: 0
0 Loss_of_sig:
0 Protocol_err: 0
0 Invalid_word: 0
0 Invalid_crc:
0 Delim_err:
0 Address_err:
0 Lr_in:
0 Lr_out:
0 Ols_in:
0 Ols_out:
0
FID Neighbor Switch Info (WWN, enet IP, name)
30 10:00:00:60:69:e2:09:fa
PID fmt: au
Frjt :
Fbsy :
2
0
0
0
0
0
0
0
1, Info: 10.33.59.38,
10.33.59.25 "fcr_meteor2"
Fabric OS 5.2.x administrator guide 215
0
0