Deleting An Account - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

where:
username
-r rolename
-h logicalFabric_ID
or
adminDomain_ID
-l logicalFabric_ID_list
-a adminDomain_ID_list
-d description
-c chassis_role
-x
3. In response to the prompt, enter a password for the account.
The password is not displayed when you enter it on the command line.

Deleting an account

This procedure can be performed on local user accounts.
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the following command:
userConfig --delete username
where username specifies the account name
NOTE:
sessions for the deleted account are logged out.
3. At the prompt for confirmation, enter y.
72 Managing user accounts
Specifies the account name, which must begin with an alphabetic
character. The name can be from 8 to 40 characters long. It is
case-sensitive and can contain alphabetic and numeric
characters, the period (.) and the underscore ( _ ). It must be
different than all other account names on the Logical Switch.
Specifies the role: User, SwitchAdmin, ZoneAdmin, FabricAdmin,
BasicSwitchAdmin, Operator, or Admin in nonsecure mode; in
secure mode you can also use NonfcsAdmin. The role name
cannot be the same as the account name.
Optional: Specifies either the home Virtual Fabric or
Administrative Domain. If no Virtual Fabric or Administrative
Domain is specified, the lowest number Virtual Fabric or
Administrative Domain in the list is assigned.
Optional: Specifies which Logical Fabrics the user may access; if
no Logical Fabrics are listed, the user is automatically assigned to
LF128 or the lowest Logical Fabric they belong to. Use
comma-separated lists, ranges, or both, for example: -l
1,9,10-- 1 5,244.
Optional: Specifies which Administrative Domains the user may
access; if no Administrative Domains are listed, the user is
automatically assigned to AD0. Use comma-separated lists,
ranges, or both, for example -a 0,9,10-- 1 5,244.
Optional: Adds a description to the account. The description field
can be up to 40 printable ASCII characters long. The following
characters are not allowed: asterisk (*), single quotation mark ('),
quotation mark ("), exclamation point (!), semicolon (;), and
colon (:).
Specifies the account's access permissions at the chassis level.
The chassis role allows the user to execute chassis-related
commands in a Logical Fabric-enabled environment. To assign the
chassis role to an account, the executing account must have
chassis-level permissions. Valid chassis roles are: User,
SwitchAdmin, ZoneAdmin, FabricAdmin, BasicSwitchAdmin,
Operator, or Admin.
Specifies an expired password that must be changed the first time
the user logs in.
You cannot delete the default accounts. An account cannot delete itself. All active CLI