HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 378

• If you are not configuring an HP StorageWorks 4/256 SAN Director, HP StorageWorks DC SAN
Backbone Director, or HP StorageWorks DC04 SAN Director Switch platform, skip to
switch:admin> slotshow -m
Slot Blade Type
--------------------------------------------------
1
2
3
4
5
6
7
8
9
10
11
12
See Chapter 10,
corresponding IDs.
If you are configuring the HP StorageWorks 4/256 SAN Director with a B-Series Multi-Protocol Router
3.
Blade, enter the chassisConfig command to verify that the director is using configuration option 5.
switch:admin> chassisconfig
Current Option: 5
All Supported Options
----------------------------------------------------
Option 5: One 384-port switch
Blade ID's 17, 18, 24, 31, 36, 39, 37, 51, 55 in slots 1-4, 7-10
Blade ID 16 in slots 5-6
4. If you are configuring EX_Ports on the 8-Gb/s port blades on the HP StorageWorks DC SAN Backbone
Director or HP StorageWorks DC04 SAN Director Switch (HP StorageWorks SAN Director 16 Port 8Gb
FC blade, HP StorageWorks SAN Director 32 Port 8Gb FC blade, or HP StorageWorks SAN Director
48 Port 8Gb FC blade), enter the licenseShow command to verify that the Integrated Routing license
is installed.
switch:admin> licenseshow
If the Integrated Routing license is not installed, you must install it, as described in Chapter 1.
"Performing basic configuration
376 Using the FC-FC routing service
ID
AP BLADE 33
AP BLADE 24
SW BLADE 37
SW BLADE 39
CORE BLADE 52
CP BLADE 50
CP BLADE 50
CORE BLADE 52
SW BLADE 37
SW BLADE 55
UNKNOWN
SW BLADE 51
"Configuring Enterprise-class
S9bddb9SQbTAceeC:
Fabric license
bzbzRcbcSc0c0SY:
Remote Fabric license
RyeSzRScycazfT0G:
Integrated Routing license
tasks" on page 29.
Model Name Status
FA4-18 ENABLED
FR4-18i ENABLED
FC8-16 ENABLED
FC10-6 ENABLED
CORE8 ENABLED
CP8 ENABLED
CP8 ENABLED
CORE8 ENABLED
FC8-16 ENABLED
FC8-32 ENABLED
VACANT
FC8-48 ENABLED
platforms" on page 267 for a list of blades and their
step 5.