HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 318

The following is an example.
switch:admin> iscsicfg --show tgt -t
iqn.2002-12.com.brocade:example-disk001 -v
Number of records found: 1
Name: iqn.2002-10.com.brocade.example:disk001
State/Status: Offline/Defined
Auth. Method: None
4. Enter the fcLunQuery command to display a list of connected FC targets and show the LUN
configurations.
The following is an example.
switch:admin> fclunquery
Target Index: 1
Target Node WWN: 20:00:00:04:cf:e7:74:cf
Target Port WWN: 21:00:00:04:cf:e7:74:cf
Target Pid: 120d6
Number of LUNs returned by query: 1
LUN ID: 0x00
Target Index: 2
Target Node WWN: 20:00:00:04:cf:e7:73:7e
Target Port WWN: 21:00:00:04:cf:e7:73:7e
Target Pid: 120d9
Number of LUNs returned by query: 1
LUN ID: 0x00
Target Index: 3
Target Node WWN: 2f:ff:00:06:2b:0d:12:99
Target Port WWN: 2f:ff:00:06:2b:0d:12:99
Target Pid: 12300
Number of LUNs returned by query: 16
LUN ID: 0x00
LUN ID: 0x01
LUN ID: 0x02
LUN ID: 0x03
LUN ID: 0x04
LUN ID: 0x05
LUN ID: 0x06
LUN ID: 0x07
LUN ID: 0x08
LUN ID: 0x09
LUN ID: 0x0a
LUN ID: 0x0b
LUN ID: 0x0c
LUN ID: 0x0d
LUN ID: 0x0e
LUN ID: 0x0f
5. Enter the iscsiCfg --add lun command with –t <IQN>, –w <port_WWN>, and –l <n:n>
options to add an FC device to an existing iSCSI VT,
where:
-t <IQN>
-w <port_WWN>
316 iSCSI gateway service
Specifies the unique IQN name for the iSCSI VT in the format:
iqn.2002- 1 2.com.brocade:<user_defined_name>.
Specifies the port WWN of the physical FC target