Show Ipv6 Pimdm Neighbor - Dell PowerConnect 6224 Command Line Interface Manual

Neighbor Count ................................ 0
Hello Interval (secs).......................... 30
Designated Router.............................. Not
Supported
console#show ipv6 pimdm interface all
Address Interface Neighbor
--------------
192.168.37.6 vlan 10
192.168.36.129 vlan 20
10.1.37.2 vlan 24

show ipv6 pimdm neighbor

The show ipv6 pimdm neighbor command is used to display PIM-DM
Neighbor information including Neighbor Address, Uptime and Expiry time
for all interfaces or for the specified interface.
Syntax
show ipv6 pimdm neighbor [ interface vlan
vlan-id — A valid VLAN ID.
• vlan
• all — To show neighbor information for all valid interfaces.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
812
IPv6 Routing Commands
Hello
Count
--------- --------
2 30
2
1 30
Interval
-------
30
vlan-id
| all ]